Water Master Electrode Storage Solution (300ml)

Storage:

After finishing the measurement, the electrode should be rinsed with distilled water and stored. This can be done in the lid of the electrode or in a bottle, in both cases, leave the electrode moistened with a storage solution that can be based on KCl 3.5M or in buffer 4.

Do not use moistened cotton wool or anything that touches the electrode bulb, as this is very easily damaged.

Thorough cleaning:

In case the electrode requires further cleaning, either because it is measuring in waste water or with a lot of colour, a cleaning solution based on 0.1% hydrochloric acid should be used by immersing the tip of the electrode for at least 15 minutes.

Specifications of Water Master Electrode Storage Solution (300ml)

• Water Master
• General purpose storage solution
• 300ml

Contents of the shipment

• Water Master Electrode Storage Solution (300ml)