EC / TDS Conductivity Meter and Temperature Hanna Aqua Dip (HI 983 310)

Aqua Dip: Economical, resistant and precise meter for TDS and Temperature in places with a high percentage of humidity. The HI 983310 (Aqua Dip) meter is extremely easy to use. It has two operation buttons, which allow you to obtain an immediate and precise measurement of electrical conductivity and temperature. Factory calibrated, it offers complete moisture protection and is ideal for field analysis. With the probe itself it is possible to remove the nutrition solution and perform the measurements. 40 cm long rigid probe. - Water resistant
- Two levels of LCD liquid crystal display
- HOLD button to freeze the display
- Auto power off after 8 minutes of inactivity
- No need for calibration
/>- Economical, resistant and precise

EC / TDS Conductivity Meter and Temperature Hanna Aqua Dip (HI 983 310) specifications

- Hanna Instruments brand
- Model: HI 983310
- TDS measurement scale: 0-1999 ppm (mg/L)
- TDS resolution: 1 ppm
- TDS accuracy: ± 2% F.E
- Temperature measurement scale: 0-60ºC ppm (mg/L)
- Temperature resolution: 0.1ºC
- Temperature accuracy: ± 0.5ºC< br />- Deviation ± 2% F.E
- Typical EMC: ± 0.5ºC
- TDS factor: 0.5
- Factory calibrated, no need to recalibrate
- Compensation automatic temperature: automatic, with ß=2.1% / °C
- Conditions of use: from 0 to 50°C; H.R. max 100%
- Power supply: 2 x 1.5V AAA / up to 180 hours of continuous use
- Auto power off after 8 minutes of inactivity
- Dimensions: 92x38x450mm

Content of the shipment

- Hanna HI 983310 TDS conductivity meter
- Batteries included (2 x 1.5V AAA)
- User manual