PH Messgerät / Controller von Milwaukee (MC110)

The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir. Each unit features a user selectable set-point. An LED visual alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point. 

All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and starter calibration solution.

Professional pH monitor especially designed for use with aquariums.

• User selectable Hi/Low Set Point 
  
  
• Manual 2 points calibration 
  
  
• Visual LED alarm 
  
  
• Supplied with 12 VDC adapter, mounting kit, and 20ml pH 7.01 calibration solution 
  
  
• Double junction pH electrode with 2m cable (BNC connector)

Specifications of PH Messgerät / Controller von Milwaukee (MC110)

• Milwaukee Brand
• Model MC110
• It can be used to control pH Plus or pH less
• Range: 0.0 - 14.0 pH
• Resolution: 0.1 pH
• Accuracy: +/- 0.2 pH
• Calibration: Manual of 2 points.
• Control range: 3.5 to 7.5 pH and from 5.5 to 9.5 pH
• Alarm: Activates if the value is less than or greater than the selected one.
• Solenoid valve activation plug.
• BNC pH electrode: MA911 (included)
• Electrode cable length: 2m
• Calibration in 2 points (4.01.7.01 or 10.01)
• 12V transformer included
• 230VAC, 1A, 50Hz
• Operating temperature: 0 to 50 ° C (32 to 122 ° F); max RH 95%
• Dimensions of the controller: 148.5x82.5x32mm
• Weight: 180g

Shipment content

• PH Messgerät / Controller von Milwaukee (MC110)
• BNC Electrode pH MA911
• Power output jack controller
• Calibration screwdriver
• Calibration envelope Milwaukee pH 7.01
• Power cable and plug (male)
• User's manual