EC Pufferlösung Kalibrierlösung Eichlösung Milwaukee 1413 µS/cm 230ml (MA9061)

Calibration solution bottle Milwaukee Instruments EC 1413 µS/cm. The EC meters are misadjusted to the correct extent with use and it is necessary to regulate the measurement by adjusting the meters to the correct values with these solutions. It is recommended to clean the meters after use and calibrate them every month or two months depending on their use. Milwaukee's solutions are made from established formulas and are standardized with a EC meter calibrated with standard NIST standard calibration solutions. Careful handling and good cleaning (cleaning solution for the electrodes) is essential for a good result in the measurements.

The calibration can be manual or automatic:

In the case of manual calibration with the buffer EC 1413 µS/cm canister 230ml, turn on your meter, put the meter or the electrode inside the vessel, shake slightly to facilitate the reading of the buffer by the meter, and, with the help of the calibration screwdriver or from the calibration roulette (depending on model) adjust the data of your screen to the data indicated in the buffer.

In case of automatic calibration with buffer EC 1413 µS/cm canister 230ml, follow the instructions of your meter manual. The way to calibrate will depend on each type of meter.