Voltage Detector contactless Trotec (BE14)

The BE14 is a non-contact phase tester, which enables not only the quick localisation of line breakage in open cables (for example by cable drums or lights) but also detects live conductors such as sockets, switch or cable connections.

The capacitive measuring method allows contact-free voltage measuring to be carried out quickly and easily.

The red LED glow lamp starts to pulsate as soon as the measuring tip detects voltage in the localisation area and this is accompanied by an acoustic alarm.

Practical detail: There is a high-performance LED flashlight built into the side where the clip is on the BE14 which allows the user to illuminate the measuring point as best as possible.

The BE14 should by all means become a standard piece of equipment for testing voltage carrying conductors both at home and at the workplace when work is to be carried out on such installations.

Benefits in practice:

1. Quick and contact-free detection of AC voltage
2. Optic and acoustic alarm in case of voltage
3. Compact pen-design with pocket clip
4. Built-in flashlight
5. Excellent value for money

Specificaction of Voltage Detector contactless Trotec (BE14)

• Measuring circuit category : CAT III 1000 V / CAT IV 600 V
• Measuring range: UAC 100 to 1,000 V
• Micro-environment: Pollution degree 2
• Testing method: unipolar, contact-free
• Voltage display: LED
• Functions: non-touch AC voltage recognition ( without galvanic contact ), acoustic alarm, optical alarm, integrated torch
• Environmental conditions (humidity): max. 95 % r.H.
• Environmental conditions (temperature): -10 °C up to 50 °C
• Safety: EN 61326, EN 61010-1, EN 61010-02-031
• Power supply: 2 x 1,5 V, AAA
• Dimensions: 176 x 26 x 26 mm
• Weight: 48 g
• Scope of supply: Meter, batteries, operating instructions

Shipping Contents

• Voltage Detector contactless Trotec (BE14)
• 2x batteries 1,5 V, IEC LR03
• Operating instructions